amax-1752 amax-1754 amax-1756 specifcations isolated digital input ? channels amax-1752: 32 amax-1756: 16 ? input type dry contact ? isolation protection 2,500 v rms ? opto-isolator response 100 s (max.) ? input resistance 3.2k isolated digital output ? channels amax-1754: 32 amax-1756: 16 ? output type sink (npn) (open collector darlington transistors) ? isolation protection 2,500 v rms ? output voltage 10 ~ 30 v dc ? sink current 1 ch: 500 ma (1 port) general ? bus type amonet rs-485 ? certifcation ce, fcc class a ? connectors (1) rj-45 x 2 are for communication port (2) i/o points use screw terminal type connector ? dimensions 141 x 95 x 60 mm (5.6" x 3.7" x 2.4") ? power consumption 600mw typical, 2 w max. ? power input 24 v dc within 200 ma ripple ? power supply for dio 10 ~ 30 v dc (2a max) ? humidity 5 ~ 95% rh, non-condensing (iec 60068-2-3) ? operating temperature 0 ~ 60c (32 ~ 140f) ordering information ? amax-1752-ae open frame type 32-ch isolated digital input amonet module ? amax-1754-ae open frame type 32-ch isolated digital output amonet module ? AMAX-1756-AE open frame type 16/16-ch isolated digital i/o amonet module introduction the amax-1752, amax-1754 and amax-1756 are compact open frame designs for horizontal placement, on-board screw terminal for direct wiring and on-board easily-visible led indicators are for system diagnosis. all the digital i/o slave modules could be connected and distributed by standard lan cables thereby saving wiring costs and maintenance. three models are introduced: 32-ch digital input (amax-1752), 32-ch digital output (amax-1754) and 16-ch digital input/output (amax-1756). according to maximum communication baud rate, 2048 i/o points can be scanned and updated within 1.04 ms. ? communication baud rate, 2.5mbps, 5mbps, 10mbps and 20mbps are supported and switchable ? onboard screw terminal for direct wiring ? 2,500 vrms isolation voltage ? suitable for din-rail mounting ? boardid is switchable ? easily visible led indicators on board to do diagnosis open frame type 32-ch isolated digital input/output slave modules new amax-1752 amax-1754 amax-1756 rohs compliant 2002/95/ec all product specifications are subject to change without notice last updated : 5-may-2015 motion control features
|
